Global Water EZ100 Sensor Display

All of Global Water's electronic sensors seamlessly interface to the EZ100 Sensor Display, which can be used for both portable and permanent installations. Global Water's EZ Display features a large LCD readout that can be configured to display 4-20mA electronic sensor output values in any engineering units. The portable display is housed in a rugged, weatherproof enclosure that can be either hand held or wall mounted.

WTW IQ Online Monitoring System

The IQ Sensor Net system is the most flexible, digitally based online system that provides from 1 to 20 measuring points. The module based system allows you to "grow" your system as your conitnuous water quality monitoring needs change.
For the measuring and control of wastewater, WTW offers the world's most complete line of pH/ORP, D.O., Conductivity, Nitrogen, Carbon, Phosphate, and unique self-cleaning Turbidity instrumentation, as well as comprehensive accessories.

WTW IQ SensorNet 2020 XT Controller

With an easily scalable solution, the 2020 XT allows for the connection of up to 20 sensors. This modular plug-and-play system allows you to monitor the water quality in your wastewater system continuously and accurately.

WTW IQ Sensor Net DIQ/S 282/284 Controller

The new WTW DIQ/S 282/284 (2 and 4 channel) controller replaces the DIQ/S 182 from June 2016
The new controller is for small and mid-sized wastewater treatment plants and includes a USB-interface with an internal data logger - up to 4 sensors can be connected and 20 parameters measured siumultaneously.

WTW IQ SensorNet 181 Digital Controller

The WTW IQ SensorNet 181 – the digital and cost-efficient single parameter measuring point with proven IQ Sensor Net technology and matching fixed cable sensors

WTW IQ Sensor Net Alyza Analyzer PO4

Meet Alyza! The perfect solution to support phosphate elimination as well as phosphate load monitoring - on-site analyzer for orthophosphate measurement in the IQ SENSOR NET

WTW IQ SensorNet Alyza Analyzer NH4

The IQ Analyzer features a revolutionary MultiValve that dramatically reduces reagent use and maintenance requirements.

 

WTW SensoLyt® pH / ORP Sensors

For continuous pH/ORP measurement, especially under the difficult conditions very often found in sewage treatment facilities, very high demands are made concerning the reliability and operating safety of the systems employed.

WTW CarboVis Spectral Sensors

The chemical-free spectral measurement allows a precise determination of the COD and nitrate level.
Whether influent, biological tank or effluent, the self-cleaning sensors CarboVis provides:

• High measurement reliability
• Low operating costs
• Simple handling
• Maximum durability

WTW UV 700 IQ SAC

The SAC sensor measures Spectral Absorption Coefficient (SAC) and UV transmission (UVT) at 254nm for determination of organic loads in water. With the  sensor UV 700 IQ SAC this parameter can be detected directly without any chemicals. A reference measurement is performed for compensation of turbidity influences.

WTW VisoTurb® 700 IQ & ViSolid® 700 IQ Sensors

With the VisoTurb® 700 IQ and ViSolid® 700 IQ sensors, WTW presents a family of optical sensors for turbidity and suspended solids measurement. These sensors incorporate a ultrasound cleaning system that guarantees low maintenance and long-term reliability of the sensors. Turbidity measurements in aqueous media with VisoTurb® are carried out nephelometrically in compliance with EN ISO 7027. Solid matter measurement with ViSolid® is performed according to the principle of scattered light measurement.

WTW Online Dissolved Oxygen (DO) Measurement

WTW has been continuously designing, manufacturing and satisfying the demands for reliable dissolved oxygen measurements with the most advanced online systems available anywhere.

WTW P 700 Orthophosphate Analyser

The optimum solution to support phosphate elimination as well as monitor phosphate freight - on-site analyzer for orthophosphate measurement in the IQ Sensor Net

Contact Us for more information

Global Water EZ100 Sensor Display

All of Global Water's electronic sensors seamlessly interface to the EZ100 Sensor Display, which can be used for both portable and permanent installations. Global Water's EZ Display features a large LCD readout that can be configured to display 4-20mA electronic sensor output values in any engineering units. The portable display is housed in a rugged, weatherproof enclosure that can be either hand held or wall mounted.

Meinsberg pH Combination Electrodes

pH combination electrode series: EGA 133 I, EGA 140, EGA 143, EGA 150 I, EGA 153 I, EGA 161 L/PG, EGA 173 I, EGA 233 I, EGC 151 I/S, EGP 150 I, EGV 150 I

YSI 5200A Multiparameter Monitoring and Control Instrument

Designed specifically for Aquaculture Systems, the YSI 5200A and AquaManager™ Software integrate process control, alarming, and data management into one product. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen, pH, conductivity, ORP, salinity and temperature.

YSI 5500D MultiDO Optical Monitoring and Control Instrument

Designed specifically for Aquaculture Systems, the YSI 5500D and AquaManager® Software integrate process control, alarming, and data management into one product. Simple enough to monitor one tank, powerful enough to manage a full scale farming operation from anywhere in the world. Simultaneously measure dissolved oxygen with optical technology in multiple tanks or ponds.